Welcome to RobotBox!

RobotBox is a community for robot builders to show off their projects. Add yours today.

Features of RobotBox

  • Showcase projects
  • Make new friends
  • Rate other's robots

Note: Facebook Connect temporarily disabled. Go here to login without it.

Freeduino USB complete KIT (Arduino Duemilanove Compatible)

Category: Brain
Cost: 25.00

The KIT includes the ATmega328P microcontroller and requires Arduino IDE version 0013 or higher. Select "Arduino Duemilanove w/ATmega328" in the boards menu.

  • (1) Freeduino (Arduino diecimila compatible) PCB
  • (1) Reset pusbutton
  • (1) 7805 TO220 voltage regulator
  • (1) mini USB B type Female Connector
  • (4) 3mm Green LED
  • (2) 6 pins female header
  • (2) 8 pins female header
  • (1) 2.1mm power jack
  • (1) 16 MHz Quartz or ceramic oscillator
  • (1) 1N4004
  • (1) 10K 1/4 W resistor
  • (6) 1K 1/4 W resistor
  • (7) 0.1uF Ceramic Capacitor
  • (1) 4.7uF Ceramic Capacitor
  • (1) 0.01uF Ceramic Capacitor
  • (2) 22pF Ceramic Capacitor (only with crystal)
  • (1) 100uF Electrolitic Capacitor
  • (1) 47uF Electrolitic Capacitor
  • (1) ATmega328P 28pin DIP microcontroller with duemilanove bootloader
  • (1) FT232RL USB IC pre-soldered
  • (1) 28pin IC socket
  • (1) 3 pin male header
  • (1) 2x3 pins header
  • (1) Polyfuse
  • (1) Shunt
    • Buy this part
    Projects that use this part: 
    L.A.R.S. Light Autonomous Robotic Scout
    ArduinoFun